Foam Insulation Kits by Fomo Foam Products

Ask Mr. Foam

800.339.3531

Metal Buildings

Home Builders

Comm. Builders

Existing Homes

Foam Boards

E-84 Fire Rated

Fire Systems

RADON Remediation

Roof Repair

Boats and Ships

HVAC Ductwork

Soundproofing

Relevant Links

VIDEOS

PRICING<<<<<

Calculating Amt

FREQ. Asked ?

Statements reflect: Commercial Thermal Solutions, Inc.

HOME

privacy

Fire Rated Foam Insulation by FOMO Products

(Scroll down for pricing & ordering) GOTO HOMEPAGE

All of our foam products share some distinct

properties that you should be aware of:

FOMO Products are designed to be economical and user friendly.

FOMO Products contain No VOCs or CFCs to harm the environment. .

FOMO Products can be cut, shaped, sanded and painted after curing.

NOTE: All two component kits come with gun and hose included and factory attached!

NOTE: Board Foot (bd ft) on these pages = 12"x12"x1"

NOTE: Fire Rated Products may have up to a 10 day lead time to ship. Dep. on QTY.

All 2 component foams are UL 94 Approved! E-84 is class 1 fire rated.

FIRE RATED POLYURETHANE FOAM

Fire rated foams are Available in 605 board foot kits and 205 board foot kits.

Handi-Foam? E-84 systems are two-component, chemically cured foam systems. Two-component foam systems consist of an "A" side and a "B" side. These two components mix in the nozzle of the dispensing unit, and the resulting foam cures much more quickly than one-component foams. Handi-Foam? Two-Component Foam expands at a ratio of 8:1 and carries an R-Value of 6 to 7 per inch (2.54cm). Cured foam can be trimmed, sanded and/or painted.

Typical applications include:
? Cold/storage refrigeration
? Petrochemical insulation
? Flash over protection
? Sound deadening
? Pipe chases and Fire Systems

Handi-Foam? E-84 systems meet or exceed the following Classifications, Codes and Standards:
? ASTM E-84 Specifications

HF605FR

605 Bd Ft

$700.00

HF205FR

205 Bd Ft

$360.00

A Brief Review of Fire Rated Products

Fomo manufactures numerous flame rated polyurethane products. A flame rated foam product passes fire test procedures developed by accredited organizations such as ASTM (American Society for Testing Materials) or UL (Underwriters Laboratories). Since polyurethane is an organic material and like other organic building materials, it will burn. Therefore, all of the appropriate test methods developed to rate PU foam consist of the application of an open flame to the PU sample, and the subsequent measurement of how far the flame spreads across the sample. Some of these tests require that the amount of combustion smoke generated be measured along with the flame spread. One especially difficult test, ASTM E-162, combines an open flame with a radiant heat source.

Fire Rated Materials versus Fire Stop Materials

Fire Rated
Rigid polyurethane foam is an organic material like wood. All organic matter is combustible, and thus will burn in the event of fire. Combustible organic materials like PU foam can be rendered more resistant to burning through the addition of flame retardants, or, though alterations in their chemical makeup. such enhanced products are capable of passing accredited flammability tests from noted specifying bodies such as ASTM, UL, and DIN. Common examples of tests used to rate flame resistance are ASTM E-84, UL-94, and DIN B2. When a flame retarded material passes a specified flammability test, it is termed a fire rated product. In practical terms, a fire rated product aids in reducing the risk of flashover in a major fire by its diminished role on supporting combustion. However, being organic in nature, fire rated products are still combustible. Even the most flame retarded urethane foam will undergo combustion at temperatures exceeding 550C (1022F).

Fire Stop
Fire Stop materials on the other hand are typically blends of inorganic materials such as clays and earth metal salts which do not readily support combustion. They are usually available as caulks, or in putty form. To achieve a fire stop rating, a material must pass an accredited fire stop test from, typically, the same agencies mentioned above. Fire stop test such as ASTM E-814 involve severe, prolonged exposure to a furnace type of environment. The material must endure temperatures of >850 C (1562 F) for long periods of time, typically between 1 and 4 hours. The highly non-combustible nature of fire stop materials has led to their wide spread specification in local building codes.

Did you know that 43 percent of businesses closed by fire never reopen? Another 29 percent fail within three years. Fire rated products save lives, homes and businesses.

Pricing and Ordering Information

The numbers after the II - corresponds to board foot yield
A board foot is 12" x 12"x 1" (like a floor tile 1 inch thick)
Example: The II-605 Kit covers 605 square feet 1" thick
FR = E-84 Fire Rated - SR= Slow Rise
The regular foam has fire retardant in it and is suitable for and approved for use as a structural insulation. The E-84 rated is for applications where code requires exposed foam meet a stricter fire rating, such as a metal building where the foam won't be covered with drywall, or around heat producing devices.
The 600 SR kit comes with 8 cones spray nozzles and the other sizes and formulas come with 5 cone and 3 fan tips.
The expansion ratio of this foam is 8:1. R-value is R-7 per inch and density is 1.75 pounds per cubic foot except for the roofing foam, which is 2.5 pounds per cubic foot density.
All kits come complete with hoses, gun and the tanks are pressurized. There is no need for additional equipment and they are disposable after use.
The SR, FR & 2.5 pound density formulas may require a 10 day lead time, depending on quantity ordered and production load.
Click the BUY NOW Link under the price for each kit. You can then change the quantity in the cart.
Click here for pallet pricing

NOTE: If shipping to an address other than the billing address for your credit card, that address must be on file with your credit card company as an approved ship to location. Simply call your credit card company and tell them to add that address to your approved list of ship to addresses.

Material Safety Data Sheets, Tech Sheets and Instructions

Item# - Size
MSDS Tech Data Instructions Price/Buy

HF105 - II-105
A-Side

B-Side
105 Tech Data Sheet Operating Instructions
$235.00

Buy Now

HF205 - II-205
A-Side

B-Side
205 Tech Data Sheet Operating Instructions
$335.00

Buy Now

HF605 - II-605

.

A-Side

B-Side
605 Tech Data Sheet Operating Instructions
$695.00

Buy Now

E-84 Fire Rated:

HF605FR - II-605 FR

.

HF205FR - II-205 FR
A-Side B-Side E-84 Tech Data Sheet Operating Instructions
$700.00

Buy Now

$360.00

Buy Now

HF100SR II-100 SR A-Side B-Side II-100 (SR) Tech Sheet Operating Instructions
$235.00

Buy Now

HF200SR II-200 SR A-Side B-Side II-200 (SR) Tech Sheet Operating Instructions
$360.00

Buy Now

HF600SR II-600 SR

.
A-Side B-Side II-600 (SR) Tech Sheet Operating Instructions
$700.00

Buy Now

2.5 Pound Density Roofing Foam (or other very dense foam applications)

HF145 II-145 2.5
A-Side

B-Side
II-145 Tech Data Sheet Operating Instructions
$390.00

Buy Now

HF425 II-425 2.5

.

A-Side

B-Side
II-425 Tech Data Sheet Operating Instructions
$714.00

Buy Now