|
Do
It Professionally!
FOMO
FOAM HOME PAGE |
|
Let's
DIP into the lives of some FOMO FOAM users and see
both
the unique and common uses they have found for this product. |
|
Fomo Foam. More than just a GREAT
insulation! |
AUTOMOBILE
RESTORATION |
|
 
|
-
Foam Under Hoods (fire rated)
-
Sound Control
-
Vibration Control
-
Cavity Fill
-
Sand, cut, paint easier than bondo
-
100s of uses
|
Garden
Pond, Rock Gardens and Waterfalls |
 |
|
|
Movie Sets, Amusement Parks, Design
Studios |
|
|
|
|
Trailers, Trucks, Van and Bus
Conversions |
  |
|
|
Injection Mold Pieces - Many Industries! |
  |
|
|
Mining Applications |
  |
-
Air Shaft Sealing
-
Stop Leaks
-
Cavity Fill
-
Industry Approved
-
Fire Rated Formulas
|
|
Boating and Marine |
  |
-
Fill Pontoons - It Floats!
-
Quiet Engine Wells
-
Fill Cavities
-
Sealant and even adheres to metal!
-
Eliminate shifting and vibration areas
-
Flotation Devices
-
Protect Replacement Fuel Tanks
|
|
Refrigeration |
  |
|
|
Taxidermy |
  |
-
Cavity Fill
-
Paintable and Sandable
-
Easy to work with
-
Great Adhesion
-
Can be textured
|
|
Spas and Hot Tubs |
  |
-
Save BIG on utility bills!
-
Stay Warmer Longer...less noise!
-
One II-205 kit
will do all but the very largest of hot tubs (HF205)
|
|
Crawlspace Insulation |
 |
|
|
HVAC - Foamed-in Place Ductwork Wrap |
 |
|
|
Water Pipe Insulation - Large and Small |
  |
-
No more freezing pipes!
-
Municipal Water Systems
-
Sewage Treatment Plants
-
Residential/Commercial
-
Seals and Insulates!
|
|
And, of course, Insulation |
| |
Air Sealing
US Dept. of Energy Air
Sealing PDF File. Click Here |
 |
 |
Metal Buildings |
 |
Basements, Block Walls |
 |
S |
 |
Window Frames - Patented
Low Pressure Formula Available! |
| |
Cavity Fill
interior and exterior walls
Wood, Metal, Block, Prefab
Sound and Thermal |
|
.
If you are building a house and
thinking of using 2" x 6" wall studs so you can get an R-18 batt
in
the outside walls, consider this:
If 2" x 4"s are present instead
and have 1" of two-component Fomo Foam
installed in the wall
cavity and an R-11 unfaced fiberglass Batt behind it, you would have an
R-18 in the
2" x 4" wall.
The foam gives you the air seal that a
batt can't and the R-11 batt gives you the reduced conductive heat loss
for a cost effective R-18 wall assembly.
What you save on lumber will
practically pay for the insulation upgrade to R-18 and give you extra
square footage of living space that would be taken up with the extra 2
inches of wall around the whole house. You'll also have better
soundproofing.
More and more builders are using this
system. It takes less
trees (and money) to build a house of 2 x 4s than 2 x 6s.
The easy to install and complete foam
kits for a new construction house will cost approximately $.88 per square
foot. Price the batts locally and compare the price of 2 x 4s and 2 x 6s,
subtract the difference from the cost of the insulation to get your
true cost or savings. Consider the higher R-value, soundproofing, mold
inhibiting properties and the
extra square footage of living space you pick up.
Don't forget to consider you'll also be
saving money every month on your utility bills because the foam will make
a better air seal and your heating and cooling costs will be less than
they would be with an R-19 batt in a 2" x 6" wall.
After figuring, just make a decision
you can live with.
FOMO FOAM. It just makes sense.
|
|
DID YOU
DO SOMETHING REALLY COOL? Share it!
If you have a unique use for
Low Pressure Polyurethane foam or a picture of your application or cool
creation and submit a picture
we use on this site, you will get a credit with an email link
and link to your website under
your picture! Along with valuable coupons good at fomofoam.com! Send to foamdesign@fomofoam.com |
